Shop
Our Services
Flash Point Testing – ASTM D1310
Flash Point Testing – ASTM D1310 (Tag Open Cup)
ASTM D1310 flash point testing determines the lowest temperature at which a liquid produces sufficient vapor to ignite when exposed to an ignition source using the Tag Open Cup method.
Price per sample:
$205
Additional information
| Turnaround Time | 2 weeks |
|---|---|
| Sample Size | 250mL |
ASTM D1310 Flash Point Testing
Pentyl Labs performs ASTM D1310 flash point testing using the Tag Open Cup method to determine the lowest temperature at which a liquid produces sufficient vapor to ignite when exposed to an ignition source under open-cup conditions.
Unlike closed-cup methods, ASTM D1310 evaluates samples in an open environment where vapors are freely exposed to the surrounding atmosphere. This testing approach can provide valuable information regarding the flammability characteristics of liquids during storage, handling, manufacturing, transportation, and end-use applications.
Applications
ASTM D1310 is commonly used for:
- Solvents and solvent blends
- Petroleum products
- Fuels and fuel additives
- Industrial chemicals
- Oils and lubricants
- Coatings and specialty formulations
- Chemical intermediates
- Research and development materials
Why ASTM D1310 Testing Matters
Flash point is one of the most important physical properties used to evaluate the fire hazards of liquids. Accurate flash point data helps manufacturers, distributors, and end users understand the temperatures at which a material may generate ignitable vapors.
ASTM D1310 results are frequently used to support:
- Safety Data Sheet (SDS) preparation
- Hazard classification
- Product stewardship programs
- Quality control and specification verification
- Transportation and storage evaluations
- Internal safety and risk assessments
By determining the flash point of a material, organizations can make informed decisions regarding safe handling practices, storage requirements, and regulatory obligations.
Reporting
Test results are reported in degrees Celsius (°C) in accordance with ASTM D1310 requirements. Pentyl Labs provides rapid turnaround times and clear, regulatory-ready reports suitable for product development, quality assurance, and compliance programs.
Additional Resources
For information regarding hazard communication requirements, visit the OSHA Hazard Communication Standard:
https://www.osha.gov/hazcom
For official method details, refer to the ASTM D1310 standard:
https://www.astm.org/d1310-22.html
Need ASTM D1310 testing? Contact Pentyl Labs at [email protected] for a quotation or sample submission instructions.
Contact
Pentyl Labs provides accurate, defensible ASTM D1310 flash and fire point results with rapid turnaround and regulatory-ready reporting.
📧 [email protected]
Description
ASTM D1310 Flash Point Testing
Pentyl Labs performs ASTM D1310 flash point testing using the Tag Open Cup method to determine the lowest temperature at which a liquid produces sufficient vapor to ignite when exposed to an ignition source under open-cup conditions.
Unlike closed-cup methods, ASTM D1310 evaluates samples in an open environment where vapors are freely exposed to the surrounding atmosphere. This testing approach can provide valuable information regarding the flammability characteristics of liquids during storage, handling, manufacturing, transportation, and end-use applications.
Applications
ASTM D1310 is commonly used for:
- Solvents and solvent blends
- Petroleum products
- Fuels and fuel additives
- Industrial chemicals
- Oils and lubricants
- Coatings and specialty formulations
- Chemical intermediates
- Research and development materials
Why ASTM D1310 Testing Matters
Flash point is one of the most important physical properties used to evaluate the fire hazards of liquids. Accurate flash point data helps manufacturers, distributors, and end users understand the temperatures at which a material may generate ignitable vapors.
ASTM D1310 results are frequently used to support:
- Safety Data Sheet (SDS) preparation
- Hazard classification
- Product stewardship programs
- Quality control and specification verification
- Transportation and storage evaluations
- Internal safety and risk assessments
By determining the flash point of a material, organizations can make informed decisions regarding safe handling practices, storage requirements, and regulatory obligations.
Reporting
Test results are reported in degrees Celsius (°C) in accordance with ASTM D1310 requirements. Pentyl Labs provides rapid turnaround times and clear, regulatory-ready reports suitable for product development, quality assurance, and compliance programs.
Additional Resources
For information regarding hazard communication requirements, visit the OSHA Hazard Communication Standard:
https://www.osha.gov/hazcom
For official method details, refer to the ASTM D1310 standard:
https://www.astm.org/d1310-22.html
Need ASTM D1310 testing? Contact Pentyl Labs at [email protected] for a quotation or sample submission instructions.
Contact
Pentyl Labs provides accurate, defensible ASTM D1310 flash and fire point results with rapid turnaround and regulatory-ready reporting.
📧 [email protected]
